燃?xì)忮仩t長期不使用，如果處理不及時或者是處理不當，假如鍋爐內部存在水分殘留，爐體外部有煙灰爐渣的侵蝕和銹蝕，建會導致燃?xì)忮仩t壽命縮短，同時容易存在安全隱患。燃?xì)忮仩t夏季停爐使用的保養方案，在燃?xì)忮仩t長期停用時，要注意爐體內部和外部的防腐保養。
1、清灰：首先在鍋爐停爐冷卻后，必須徹底清除受熱面的積灰和爐排上部、爐體下部的灰渣。
First, after the boiler shutdown cooling, must be thoroughly cleaned the upper, the lower part of the furnace grate ash fouling and heating surface.
2、通風：要保持煙道有一定的自然通風同時應在爐膛、煙道中放置干燥劑。如若是輕微潮濕可以放置每立方米3kg左右生石灰，同時注意更換。嚴重潮濕，則應采用經常小火烘烤和放置干燥劑相結合的辦法，在徹底清除煙灰后在爐體金屬外表面涂以紅丹油或其它防腐漆。
To maintain a certain degree of natural ventilation flue while the desiccant should be placed in the furnace, flue. Should a slight damp can be placed around 3kg lime per cubic meter, while paying attention to replacement. Severe damp, should be used often small fire baking and placed desiccant combination of approaches, after complete removal of soot in the furnace metal exterior top coat with red lead paint oil or other preservative.
3、燥劑不要直接接觸燃?xì)忮仩t金屬表面，可裝在鐵盤等容器內;放置干燥劑后，要關嚴手孔和其它孔蓋，汽、水管道上的閥門必須截?cái)?生石灰變粉應及時更換。
Do not direct contact with the desiccant gas boiler metal surfaces can be installed in the iron plate and other containers; after placing desiccant to shutting hand holes and other manhole covers,gas, water pipeline valves must be cut off; quicklime change powder should be replaced .
